blob: 719143243ea8cc4720f7fbb0d1dedac7374a033d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
|
#compile options
TOOLCHAIN_DIR=/home/indigo/packs/avr8-gnu-toolchain-linux_x86_64
CC=$(TOOLCHAIN_DIR)/bin/avr-gcc
LD=$(TOOLCHAIN_DIR)/bin/avr-ld
INC=$(TOOLCHAIN_DIR)/avr/include
OUT=compiled_payload.elf
DEVICE=atmega2560
#DEVICE=atmega328p
F_CPU=16000000
DEBUG=1
#avrdude options
PARTNO=ATmega2560
#PARTNO=ATmega328p
PORT=/dev/ttyUSB0
DEBUG_PORT=/dev/ttyACM0 #only works on atmega2560, intented for debugging flashing
BAUD=115200
#baudrate
RUNTIME_BAUDRATE=9600
make:
#$(CC) -mmcu=$(DEVICE) -I $(INC) -c debug_serial.o -DDEBUG_BUILD=$(DEBUG) -DBAUD=$(RUNTIME_BAUDRATE) -DF_CPU=$(F_CPU) -Wall -O1 debug_serial.c
#$(CC) -mmcu=$(DEVICE) -I $(INC) -c main.o -DDEBUG_BUILD=$(DEBUG) -DBAUD=$(RUNTIME_BAUDRATE) -DF_CPU=$(F_CPU) -Wall -O1 main.c
#$(CC) -mmcu=$(DEVICE) -I $(INC) -c debug_serial.o -DDEBUG_BUILD=$(DEBUG) -DBAUD=$(RUNTIME_BAUDRATE) -DF_CPU=$(F_CPU) -Wall -O1 i2c.c
#$(LD) -mavr6 -o $(OUT) -s main.o debug_serial.o #TODO wish I knew how to make -mavr6 dependent on DEVICE
#TODO no debug.c if debug disabled
$(CC) -mmcu=$(DEVICE) -I $(INC) -o $(OUT) -DDEBUG_BUILD=$(DEBUG) -DBAUD=$(RUNTIME_BAUDRATE) -DF_CPU=$(F_CPU) -Wall -O1 main.c debug.c i2c.c ssd1306_display_driver.c uart.c br24t_eeprom_driver.c paint.c pcf_clock_driver.c -Wall
compiledb make --dry-run > /dev/null
reset:
doas avrdude -c usbtiny -p $(PARTNO)
eeprom_write:
doas avrdude -c usbtiny -p $(PARTNO)
doas ./write_eeprom.py $(PORT) $(RUNTIME_BAUDRATE)
eeprom:
./compile_eeprom.py
eeprom_install:
$(CC) -mmcu=atmega2560 -I $(INC) -o $(OUT) -DFLASH_EEPROM -DDEBUG_BUILD=$(DEBUG) -DBAUD=$(RUNTIME_BAUDRATE) -DF_CPU=$(F_CPU) -Wall -O1 main.c debug.c i2c.c ssd1306_display_driver.c uart.c br24t_eeprom_driver.c paint.c -Wall
doas avrdude -B 1 -v -p ATmega2560 -c usbtiny -U flash:w:$(OUT):e
install: $(OUT)
doas avrdude -B 1 -v -p $(PARTNO) -c usbtiny -U flash:w:$(OUT):e
#doas avrdude -v -p $(PARTNO) -P $(PORT) -c wiring -b $(BAUD) -D -U flash:w:$(OUT):e
screen:
doas avrdude -c usbtiny -p $(PARTNO)
#doas screen $(PORT) $(RUNTIME_BAUDRATE)
doas screen $(DEBUG_PORT) $(RUNTIME_BAUDRATE)
clean:
rm -f *.o *.elf compiled_eeprom
|
